home *** CD-ROM | disk | FTP | other *** search
/ Floppyshop 2 / Floppyshop - 2.zip / Floppyshop - 2.iso / diskmags / 0022-3.564 / dmg-0125 / 300.txt next >
Text File  |  1997-04-16  |  27KB  |  711 lines

  1. Info-Atari16 Digest         Wed, 29 May 91       Volume 91 : Issue 300
  2.  
  3. Today's Topics:
  4.            :-)   (was: Re: Mega STe Question (or Problems))
  5.                    DEALER & MAIL ORDER HOUSE LIST!!
  6.                            DIY RAM upgrade
  7.                      Info-Atari16 Digest V91 #297
  8.                         Mega STe and Hard Disk
  9.                         Mega STe applications
  10.                    Mega STe Question (or Problems)
  11.                        Neodesk3.0x Update ????
  12.             only_ste.lzh (was Re: ST User Virus!) (2 msgs)
  13.                     RS-232 Port READ/WRITE status
  14.                   Strange Tempus / Mupfel / AES bug
  15.                             ST User Virus!
  16.                 TRANSFERRING FILE TO & FROM PORTFOLIO
  17.                                TT users
  18.  
  19. Welcome to the Info-Atari16 Digest.  The configuration for the automatic
  20. cross-posting to/from Usenet is getting closer, but still getting thrashed
  21. out.  Please send notifications about broken digests or bogus messages
  22. to Info-Atari16-Request@NAUCSE.CSE.NAU.EDU.
  23.  
  24. Please send requests for un/subscription and other administrivia to
  25. Info-Atari16-Request, *NOT* Info-Atari16.  Requests that go to the list
  26. instead of the moderators are likely to be lost or ignored.
  27.  
  28. If you want to unsubscribe, and you're receiving the digest indirectly
  29. from someplace (usually a BITNET host) that redistributes it, please
  30. contact the redistributor, not us.
  31. ----------------------------------------------------------------------
  32.  
  33. Date: 29 May 91 10:03:38 GMT
  34. From: mcsun!cernvax!chx400!urz.unibas.ch!hofer@uunet.uu.net (Remo Hofer)
  35. Subject: :-)   (was: Re: Mega STe Question (or Problems))
  36. To: Info-Atari16@naucse.cse.nau.edu
  37.  
  38. In article <1991May28.114007.22430@informatik.uni-erlangen.de>,
  39. csbrod@immd4.informatik.uni-erlangen.de (Claus Brod) writes:
  40. >
  41. > ekrimen@ecst.csuchico.edu (Ed Krimen) writes:
  42. >>Jerry Pournelle in his 'review' in Byte also commented on this delay.  He
  43. >>made it seem like his TT waited for several minutes however.
  44. >
  45. > Which sheds some light on the way he likes to test gadgets. He would only
  46. > have to press any key...
  47.  
  48. But where is any key located on your keyboard? I couldn't find it on mine. :-)
  49. Remo Hofer
  50. --
  51.        RFC822:  <hofer@urz.unibas.ch> or <hofer%urz.unibas.ch@CERNVAX.BITNET>
  52.         X.400:  S=hofer;OU=urz;O=unibas;P=SWITCH;A=ARCOM;C=CH
  53.   HEPNET/SPAN:  CHGATE::YOGI::HOFER or 20579::48130::HOFER
  54.  
  55. ------------------------------
  56.  
  57. Date: 29 May 91 03:39:06 GMT
  58. From:
  59.  noao!ncar!elroy.jpl.nasa.gov!swrinde!mips!pacbell.com!iggy.GW.Vitalink.COM!wide
  60.  ner!netnews.upenn.edu!wharton.upenn.edu!zeibari@arizona.edu
  61. Subject: DEALER & MAIL ORDER HOUSE LIST!!
  62. To: Info-Atari16@naucse.cse.nau.edu
  63.  
  64. Hello All,
  65.  
  66. This is the list of dealers I have received so far.
  67. They are in NO PARTICULAR ORDER, I just append incoming mail
  68. to the end of this document. I did edit some of your mail messages
  69. to keep it short, you can ask the companies questions as to
  70. what they offer exactly. I am not responsible for the accuracy of the
  71. information listed below and I am not in anyway affiliated with any of
  72. the companies.  Hope this helps everyone.
  73.  
  74. p.s. If you object to this posting, please flame me either on the net or
  75.      thru email, I would like any feedback you give me (positive | negative ;-)
  76.  
  77.  
  78. AtariVille in San Antonio, TX.  phone: (512)736-1405.
  79. hardware and software
  80.  
  81. Goldleaf Publishing: (415) 257-3510
  82. software
  83.  
  84. MicroTyme: 1-800-255-5835
  85. hardware,software,repairs
  86.  
  87. Toad Computers: (301) 544-6943
  88. hardware,repairs
  89.  
  90. "The Byte Track", 10971-101 St, Edmonton, Alberta, Canada T5H 2S9
  91.         1-800-667-2983 (1-800-MOR BYTE)
  92.         (403)-424-0066, FAX: (403)-421-4039
  93. Hardware - mainly hard drives, SCSI units - good prices
  94.            other peripherals (mice, modems, other goodies)
  95.  
  96. IB Computers
  97. 2511B West 11th Ave.
  98. Eugene, OR 97402
  99. (503)-485-1424
  100. hard/software, some 8bit support as well.
  101.  
  102. B+C Computervisions
  103. 3257 Kifer Road
  104. Santa Clara, CA 95051
  105. 800-969-8810
  106. (408) 749-1003
  107. hardware,software
  108.  
  109. D&P Computer
  110. 800-535-4290
  111. hardware,software
  112.  
  113. Micro Computer Depot
  114. 800-845-3070
  115. hardware,repairs
  116.  
  117. The Electronic Clinic
  118. 301-656-7983
  119. hardware,software,repairs
  120.  
  121. CompuWare
  122. 908-290-2242
  123. hardware,software,repairs
  124.  
  125. American Techna-Vision
  126. 800-551-9995
  127. 8-bit hardware,software,repairs
  128.  
  129. Sideline Software
  130. 800-888-9273
  131. software
  132.  
  133. The ST Connection
  134. 303-423-6805
  135. PD/Shareware
  136.  
  137. Rising Star Computers
  138. 800-252-2787
  139. hardware,software
  140.  
  141. Best Electronics
  142. 408-243-6950
  143. parts for ST/8-bits
  144.  
  145. Computability
  146. (800) 558-0003
  147. hardware,software
  148.  
  149. Brad Roltgen software, 1St Stop
  150. numbers were not given
  151. hardware,software
  152.  
  153. L&Y Electronics
  154. 13644C Jefferson davis Highway
  155. Woodbridge, VA  22191
  156. (703) 643-1729
  157. Great service from them on my Mega won me over, and they have decent prices
  158. (competitive with mail order)
  159. hardware,software
  160.  
  161. Software House
  162. Perinton Square Mall, Fairport, NY 14450, 716-223-7658
  163. ST Hardware/Software storefront. Authorized Atari dealer. Authorized
  164. Atari 8-bit & ST service.
  165.  
  166. ALP Micro systemes,
  167. 4535, ave. du Parc, Montreal, Quebec, H2V 4E4,Canada, tel.
  168. 514/848-0755.  As far as I know, they do not do any mail order
  169. business.
  170.  
  171. I usually buy from Island Computer and Software in Farmingdale, NY
  172. (also in Coram, NY).  Sorry, I don't have any other information on how
  173. to reach them handy right now.  Call directory assistance (516 area
  174. code) if you wanna look them up.  They are dealers, no mail order as
  175. far as I know.  They carry Atari computers and software.  Also DOS and
  176. Amiga.
  177.  
  178. Butler's Computer Service
  179. 206-942-9096 or 622-2559
  180. Hardware,Software,Service
  181.  
  182. Cave Creek Computers
  183. 206-893-0933
  184. Hardware,Software,Service
  185.  
  186. Xanth Corporation
  187. 206-643-9697
  188. Hardware,Software,Service
  189.  
  190. Hello,
  191.     I don't have the phone numbers handy, but two excellent dealers
  192. reside in the Fort Worth/Dallas, TEXAS metroplex.  These are Computer
  193. Discoveries of Dallas and MegaByte Computers.  Both are full service,
  194. have a strong customer base.
  195.  
  196. RUN PC
  197. 524 W. Laurel #2
  198. Fort Collins, CO80521
  199. (303) 493-5565
  200. M-Sat 10AM - 6 PM
  201. hardware,software also Protfolio and Lynx.
  202.  
  203. RIO Computers
  204. 800-782-9110
  205. hardware,software,repairs
  206.  
  207. ComputAbility
  208. 800-558-0003
  209. hardware,software
  210.  
  211. Software Discounters of America
  212. 800-225-7638
  213. software
  214.  
  215. San Jose Computer
  216. 800-726-8576
  217. hardware,software
  218.  
  219. 1st STOP computer systems
  220. 800-252-2787
  221. hardware,software
  222.  
  223. Carter Graphics & computers
  224. 801-628-6111
  225. Hardware,software
  226.  
  227. Computer Garden
  228. 800-456-5689
  229. software
  230.  
  231. ****************************************************************
  232. Greg Zeibari
  233. email:  zeibari@wharton.upenn.edu
  234. school: Temple University
  235. work:   University of Pennsylvania
  236. disclaimer: If it's going to happen, it will happen on my shift.
  237. ****************************************************************
  238.  
  239. ------------------------------
  240.  
  241. Date: 28 May 91 11:46:47 GMT
  242. From: mcsun!ukc!keele!nott-cs!lut.ac.uk!elmar@uunet.uu.net (Mohammad A. Rahin)
  243. Subject: DIY RAM upgrade
  244. To: Info-Atari16@naucse.cse.nau.edu
  245.  
  246. Keywords: RAM, 2.5 Mega Byte, 520/1040 ST(FM)
  247.  
  248. In article <1991May27.132828.5352@lut.ac.uk> M.A.Rahin@lut.ac.uk (Mohammad A.
  249.  Rahin) writes:
  250. >I've uploaded a text file to atari.archive describing a DIY RAM upgrade
  251. >procedure. This is  for upgrading the memory of 520/1040 ST(FM) to  2.5
  252. >(or perhaps to 4) Mega Byte  using inexpensive 2x1MB SIPP modules. This
  253. >article is written by Christopher Hicks.
  254. >
  255. >- Rahin
  256. >
  257.  
  258. Forgot to specify the name of the file. The file name is 2_5ram.zoo and should
  259. be placed in atari/misc and also for a limited time in atari/newitems directory.
  260. Sorry for the mess-up.
  261.  
  262. - Rahin
  263.  
  264. ------------------------------
  265.  
  266. Date: 29 May 91 10:20:18 +0200
  267. From: MULDER13%F2.NHL.NL@pucc.PRINCETON.EDU
  268. Subject: Info-Atari16 Digest V91 #297
  269. To: Info-Atari16@naucse.cse.nau.edu
  270.  
  271. UNSUB Paul Henno Mulder
  272.  
  273. ------------------------------
  274.  
  275. Date: Wed, 29 May 1991 06:31:42 PDT
  276. From: Sammy_Mesbah.XRCC@xerox.com
  277. Subject: Mega STe and Hard Disk
  278. To: Info-Atari16@naucse.cse.nau.edu
  279.  
  280. This is the first time I've posted, so I hope this works.
  281.  
  282.  
  283. I have a 1040STf with TOS 1.4 and an ICD Advantage+ with a Seagate
  284. 85M SCSI hard disk.  I am planning to buy a Mega 1 STe at the end of
  285. the summer and upgrade it to 4 megs, but I have a few questions
  286. that some of you may be able to help me with:
  287.  
  288. Is upgrading a Mega 1 STe as easy as plugging in new SIMMs?
  289.  
  290. ICD told me that the Mega STe DMA port is different from a standard
  291. ST DMA port, ie. a different size connector.  They said they would
  292. have an adapter cable by June.
  293.  
  294. This is OK in that I assume I will still be able to use my ICD board for the
  295. hard drive but I'm wondering if I actually need it.  Does the Mega STe
  296. already have a SCSI controller built in?  Since the Mega 2 and 4 STe have built
  297. in hard drives, I assume there is a controller.  Does the Mega 1 STe have
  298. this as well?  I was planning on a Mega 1 since I really do not want another
  299. hard drive (85 megs is plenty) and the dealers say that the 2 and 4 must
  300. come with a hard drive.
  301.  
  302. As well, does anyone know how easy it is to hook up a Multisync
  303. monitor to the Mesga STe?  I can get a good deal on a .25mm dot
  304. pitch multisync so I wonder if there is and adapter available.
  305.  
  306. Also, has anyone noticed any difference with 16 MHz or is the RAM
  307. too slow to make it noticeable?
  308.  
  309. If this works out, anyone want to buy a 1040 STf w/ TOS 1.4 and a
  310. mono and colour monitor?
  311.  
  312.  
  313. Thanks in advance
  314. Sam Mesbah
  315. sammy_mesbah:xrcc@xerox.com  (I think)
  316.  
  317. ------------------------------
  318.  
  319. Date: 29 May 91 12:07:37 GMT
  320. From: IFI.UIO.NO!larserio@ucbvax.berkeley.edu (LarsErikOsterud)
  321. Subject: Mega STe applications
  322. To: Info-Atari16@naucse.cse.nau.edu
  323.  
  324. Exacly the same problem I had....
  325. I know of LOTS of examples of MEGA STE's with this bad chips that causes the
  326. monochrome diplay to wrap when you change screen adresse and causes static in
  327. the DMA sound, but Atari Corp won't confirm this and tell me that this is
  328. only a problem with my machine (but you are the 4th one I've heard about).
  329. Replace the chip with a chip from an old STE (not the same number so you need
  330. the print-layouts for both MEGA STE and STE to do this, the chip is called
  331. GSTSHIFTER and has to do with both video and sound in the STE machines..)
  332. I would again like a comment on this from Atari Corp.  You can't just ignore
  333. this problem that applies to a great number og MEGA STE's !!!!!???
  334.  
  335.  Lars-Erik  /  ABK-BBS +47 2132659  /   ____ ______ ________________________
  336.   Osterud  /  larserio@ifi.uio.no  /   /___    /            The norwegian ST
  337. __________/ ______________________/   ____/   /   Klubben,  user association
  338.  
  339. ------------------------------
  340.  
  341. Date: 29 May 91 05:54:01 GMT
  342. From: fs7.ece.cmu.edu!o.gp.cs.cmu.edu!redmond@sei.cmu.edu (Redmond English)
  343. Subject: Mega STe Question (or Problems)
  344. To: Info-Atari16@naucse.cse.nau.edu
  345.  
  346.  >>As just a reminder, there exists KILLDRV which turns off that darn
  347.  >>floppy disk light.  It was either posted to USENET or is available
  348.  >>from atari.archive.  Both source and binaries should be available:
  349.  >
  350.  >KILLDRV will just turn out the LED and not the floppy motor, right?
  351.  
  352.  On my Ste, when I boot off the hard drive without a floppy, it's ONLY
  353.  the floppy LED that stays on.  The motor goes off by itself.
  354.  
  355.                                Red/.
  356.  
  357. ------------------------------
  358.  
  359. Date: 29 May 91 08:55:40 GMT
  360. From: mcsun!unido!opal!gmdtub!prosun!ralph@uunet.uu.net (Ralph Berg)
  361. Subject: Neodesk3.0x Update ????
  362. To: Info-Atari16@naucse.cse.nau.edu
  363.  
  364. Hello Neodesker,
  365.  
  366. where I can get the Update for Neodesk3 to Neodesk3.0x?
  367. Who knows about the main differences?
  368. Is symbol count on the desktop (now 32) increased?
  369.  
  370. Thanks in advance
  371. Ralph
  372.  
  373. ----------------------------------------------------------------------
  374. Ralph Berg, Reichenbergerstr.89,
  375. D-1000 Berlin 36, West Germany         during day  030/25499151
  376. German National Research Center for Computer Science, FIRST
  377. ralph@prosun.first.gmd.de
  378. ----------------------------------------------------------------------
  379.  
  380. ------------------------------
  381.  
  382. Date: 29 May 91 10:00:03 GMT
  383. From: mcsun!corton!laas!ralph@uunet.uu.net (Ralph P. Sobek)
  384. Subject: only_ste.lzh (was Re: ST User Virus!)
  385. To: Info-Atari16@naucse.cse.nau.edu
  386.  
  387. In article <1991May28.202555.16251@lsuc.on.ca> jimomura@lsuc.on.ca (Jim Omura)
  388.  writes:
  389. |  This brings to mind that 1 of the things
  390. |  I looked at from the Net recently was this "only_ste.lzh" sound
  391. |  demo package.  Now this is a strange package with what seems to
  392. |  be a whole disk compressed into an ".MSA" file which in turn was
  393. |  LHARC'd.  I unpacked this kit just this morning.  When I unpacked
  394. |  the disk I used the MSA.PRG auto-formatting command.  It seems to
  395. |  me that this method of packaging might allow for transporting of
  396. |  boot sector or other viruses.  Has anybody else unpacked this demo
  397. |  kit recently?
  398.  
  399. I just unpacked this demo for friends last nite!  I don't have an STe
  400. or MegaSTe, but I got 4 Mb and they were needed.
  401.  
  402. First off, I received only_ste.lzh through the News at work.
  403. Unfortunately, only_ste.lzh is incompatible with MS-DOS compatible
  404. floppy disks, since they're limited to 720 Kb.  As a reminder,
  405. only_ste.lzh is 802661 bytes long.  What to do?  I used "split" on my
  406. SPARC to chop the file in half.  Each half was put on a separate
  407. floppy and taken home.
  408.  
  409. At home, I became worried about concatenating two binary file parts
  410. together.  I then decided to run full blown GNU emacs (not mg, jove,
  411. nor micro-emacs) with a 1 Mb RAM disk.  I then inserted into my emacs
  412. buffer both halfs of the file and saved it to the RAM disk.  Of course
  413. there was no more room to unpack the file.  It tested out okay.  Well,
  414. I copied it to a floppy and extracted back to the RAM disk.  I then
  415. ran MSA to create the demo floppy.   Ouffhh!!! ;-|
  416.  
  417. The first thing I did then was to run VKILLER on it.  It stated that
  418. the floppy was executable, but no known virus was found!!  8-)
  419.  
  420. Did anyone have a much easier time of it?  I only hope that few items
  421. of this sort travel through USENET or are uploaded to atari.archive.
  422. Normally, large *.lzh or *.zoo can be split up differently since the
  423. individual member files are less than 720 Kb.
  424. --
  425. Ralph P. Sobek                    Disclaimer: The above ruminations are my own.
  426. ralph@laas.fr                              Addresses are ordered by importance.
  427. ralph@laas.uucp, or ...!uunet!laas!ralph
  428. If all else fails, try:                               sobek@eclair.Berkeley.EDU
  429. ===============================================================================
  430. Proud owner of a Mega 4 ST.  Wishing it was a Mega STe!  :-|
  431.  
  432. ------------------------------
  433.  
  434. Date: 29 May 91 12:54:15 GMT
  435. From: mcsun!inesc!unl!unl!spa@uunet.uu.net (Salvador Pinto Abreu)
  436. Subject: only_ste.lzh (was Re: ST User Virus!)
  437. To: Info-Atari16@naucse.cse.nau.edu
  438.  
  439. on 29 May 91 10:00:03 GMT,
  440. ralph@laas.fr (Ralph P. Sobek) said:
  441.  
  442. >                                                  I used "split" on my
  443. > SPARC to chop the file in half.  Each half was put on a separate
  444. > floppy and taken home.
  445.  
  446. > At home, I became worried about concatenating two binary file parts
  447. > together.  I then decided to run full blown GNU emacs (not mg, jove,
  448. > nor micro-emacs) with a 1 Mb RAM disk.  I then inserted into my emacs
  449. > buffer both halfs of the file and saved it to the RAM disk.  Of course
  450. > there was no more room to unpack the file.  It tested out okay.  Well,
  451. > I copied it to a floppy and extracted back to the RAM disk.  I then
  452. > ran MSA to create the demo floppy.   Ouffhh!!! ;-|
  453.  
  454. The exact procedure I followed was to run lharc on Unix (a DECstation
  455. 5000 unpacks LZH archives a *little* faster than an ST :-), split the
  456. file in two, and then wrote the floppies. On the ST the easiest way I
  457. found to do this was to `cat' the two parts (using GNU cat from
  458. cs.uni-sb.de), a lot faster than creating a RAMdisk and using GNU
  459. Emacs, I'd say...
  460.  
  461. > Did anyone have a much easier time of it?  I only hope that few items
  462. > of this sort travel through USENET or are uploaded to atari.archive.
  463. > Normally, large *.lzh or *.zoo can be split up differently since the
  464. > individual member files are less than 720 Kb.
  465.  
  466. The thing might be to have a simple stand-alone SPLIT/JOIN program on
  467. the ST. If I knew more about GEM I'd do it myself (maybe I'll give it
  468. a try someday). By "simple" I mean one that does NOTHING but the
  469. equivalent of Unix's split and cat, ie. no headers or CRC's.
  470.  
  471. Anyway, regarding the only_ste demo, I must confess it's absolutely
  472. fabulous.
  473. --
  474. -- Salvador Pinto Abreu         spa@fct.unl.pt
  475.                                 Universidade Nova de Lisboa, PORTUGAL
  476.  
  477. ------------------------------
  478.  
  479. Date: 29 May 91 11:07:59 GMT
  480. From:
  481.  noao!ncar!elroy.jpl.nasa.gov!sdd.hp.com!news.cs.indiana.edu!ariel.unm.edu!cs.um
  482.  n.edu!uc!shamash!timbuk!marc@arizona.edu (Marc Bouron)
  483. Subject: RS-232 Port READ/WRITE status
  484. To: Info-Atari16@naucse.cse.nau.edu
  485.  
  486. In article <16525@helios.TAMU.EDU>, n160ao@tamuts.tamu.edu (Mark Lehmann)
  487.  writes:
  488. > Curses
  489. > ------
  490. > Did anyone find a curses subroutine library for C on the Atari ST?
  491. > I am looking for some type of terminfo or termcap.
  492.  
  493. There are two curses packages at atari.archive: one is a GNU version.
  494.  
  495. > Thanks.
  496. > Mark Lehmann
  497. > Senior - Texas A&M University
  498. > IBM AIX Technical Support
  499. >
  500. > tamuts.tamu.edu!n160ao
  501. >
  502. > I am also interested if anyone found curses routines.
  503.  
  504. [M][a][r][c]
  505.  
  506.  
  507. ################################################################################
  508. #                           #  marc@sequoia.cray.com           #     .   .     #
  509. #  Marc CR Bouron           #  M.Bouron@cray.co.uk     (ARPA)  #    _|\ /|_    #
  510. #  Cray Research (UK) Ltd.  #  M.Bouron@crayuk.uucp  (DOMAIN)  #   (_|_V_|_)   #
  511. #  +44 344 485971 x2208     #  M.Bouron@uk.co.cray    (JANET)  #     |   |     #
  512. #                           #  ...!ukc!crayuk!M.Bouron (UUCP)  #               #
  513. ################################################################################
  514.  
  515. ------------------------------
  516.  
  517. Date: Wed, 29 May 91 10:51
  518. From: "Thomas Koenig"
  519.  <UI0T%DKAUNI2.BITNET@CUNYVM.CUNY.EDU>
  520. Subject: Strange Tempus / Mupfel / AES bug
  521. To: Info-Atari16 Discussion       <info-atari16@naucse.cse.nau.edu>
  522.  
  523. I recently stumbled across what I cosider to be a bug in Tempus,
  524. Mupfel, AES or any combination of these...
  525.  
  526. I did the following things:
  527.  
  528. 1) I installed a renamed Tempus somewhere along my $PATH, with
  529. different installations from the ones I normally use, which I named
  530. VI.PRG :-)
  531.  
  532. 2) In Mupfel, I set the Variable VI_PRG to D:N, in order to avoid
  533. typing 
  534. tree every time I wanted to load another text from my working
  535. directory
  536.  
  537. 3) In my current directory, I wrote a program which uses rscs_load()
  538. and rscs_gaddr() afterward to get the addresses of some strings for
  539. error messages.  There were no other AES calls in between.
  540.  
  541. All the calls returned 1 to indicate successful completion.
  542.  
  543. What I got as pointers, however, was far from correct; all of them
  544. had their lower words set to zero, and there was one NULL pointer.
  545. Needless to say, my program threw two bombs at me as soon as I used
  546. these pointers...
  547.  
  548. All of the conditions in 1) and 2) were necessary to reproduce this
  549. bug.  The SHEL_FIX program did not help.
  550.  
  551. I used a Mega ST 2 with TOS 1.04, Tempus 2.01 and 2.10 and Mupfel 1.2.
  552. The only resident programs were AHDI 3.0 and POOLFIX3.
  553.  
  554. Nice, eh?
  555.  
  556. Thomas Koenig
  557. EARN/BITNET :      UI0T@DKAUNI2.BITNET
  558. INTERNET    :      UI0T@IBM3090.RZ.UNI-KARLSRUHE.DE
  559. X.400       :      S=UI0T;OU=IBM3090;OU=RZ;P=UNI-KARLSRUHE;A=DBP;C=DE
  560.  
  561. ------------------------------
  562.  
  563. Date: 29 May 91 09:42:15 GMT
  564. From: mcsun!ukc!icdoc!syma!grahamt@uunet.uu.net (Graham S Thomas)
  565. Subject: ST User Virus!
  566. To: Info-Atari16@naucse.cse.nau.edu
  567.  
  568. From article <10099@suns2.crosfield.co.uk>, by imt@crosfield.co.uk (ian taylor):
  569. > (This is probably only of interest to UK netters, although I believe ST User
  570. > magazine is available internationally by mail order)
  571. >
  572. > Has anyone had problems with this months (June) ST User cover disk?
  573. > I think that there is a free virus included on the coverdisk, which mangled
  574. > the directory of two of my disks before I eradicated it. This is the second
  575. > time that ST User has done this, and frankly I am bloody unimpressed. Anyone
  576. > who's got this disk, beware.
  577.  
  578. I checked this out with George Woodside's VKILLER.  My disk is clean.
  579. It was formatted with Martin Backschat's FASTCOPY III, and has a
  580. formatter ID of 'IBM' in bytes 3-5 of the bootsector, but the serial
  581. number is OK - i.e. it doesn't correspond with an MS-DOS version number.
  582.  
  583. It looks like ST User is innocent this time.  (Innocent of this, at
  584. least.  On the cover disk is what they call - several times - the 'very
  585. latest version of UniTerm'.  The version is in fact 2.0c.  The last
  586. version that Simon Poole released is, I believe, 2.0e011.  2.0c is quite
  587. usable; if they didn't shout so much about the program being "hot from
  588. the programmer's fingertips" - with a 1987 copyright date??? - I
  589. wouldn't mind.)
  590.  
  591. Graham
  592. --
  593. Graham Thomas, SPRU, Mantell Building, U of Sussex, Brighton, BN1 9RF, UK
  594. Email: grahamt@syma.sussex.ac.uk   Phone: +44 273 678165   Fax: .. 685865
  595.  
  596. ------------------------------
  597.  
  598. Date: Wed, 29 May 91 21:24:05 SST
  599. From: Suthipuntha <AKISUJAR%NUSVM.BITNET@CUNYVM.CUNY.EDU>
  600. Subject: TRANSFERRING FILE TO & FROM PORTFOLIO
  601. To: INFO-ATARI16@naucse.cse.nau.edu
  602.  
  603. Hello,
  604.  
  605. Although I bought my Atari Portfolio since it first released last year, I
  606. hardly use it. I recently try its parallel and serial adapters. I can use
  607. both to print the document with the HP LaserJet IIP but I cannot use both
  608. adapter to transfer files to and from the Mega 4. I have tried parallel file
  609.  transfer using the software that comes with the adapter called 'FT.COM' and
  610. running FT.COM on Mega4 with SuperCharger but I cannot get it to work.
  611.  
  612. It works well when I connected to IBM-AT though. Is the problem due to the
  613. Mega 'non standard' parallel prot with no busy signal on pin 10? Is there any-
  614. way to work around this problem (such as putting jumper, etc.).
  615.  
  616. Serial interface also not working with Mega 4. I tried it with Flash V1.6 on
  617. Mega 4.  I also found that the pin out in the serial interface manual is not
  618. correct (may be only applies to the manual of the 1st batch of portfolio). It
  619. took me few hours to figure out by making a serial cable to link it to the Lase
  620. rJet IIP first the PIN 2 and PIN 3 has to be reverse from what shown in the
  621. manual in order to get file to print. Pin out for modem cable also incorrect.
  622. ct
  623. It is very unfortunate that both computer are the same brand but cannot communi
  624. -cate to each other whereas the Z88 has no problem in transmit and receive file
  625. to and from Atari Mega 4.
  626.  
  627. I would appreciate any suggestion/solution on this matter. Anyone has more luck
  628.  or has written a proper transfer program for the ST?
  629.  
  630. I also recall someone mentioned about the Portfolio Discussion group. I would
  631. like to know the address of them too.
  632.  
  633.  Thanks in advance,
  634.  
  635.  Suthipuntha, School of Architecture, National University of Singapore
  636.                AKISUJAR@NUSVM.BITNET
  637.  
  638. ------------------------------
  639.  
  640. Date: Wed, 29 May 91 10:35 N
  641. From: <MFAGKCHR%HMARL5.BITNET@pucc.PRINCETON.EDU>
  642. Subject: TT users
  643. To: Info-Atari16@naucse.cse.nau.edu
  644.  
  645. slammy@admiral.UUCP (Dave Litchman) writes:
  646.  
  647. >Ok, I'm sure we've all SEEN the TT, at shows and such, but does anyone
  648. >HAVE one yet?
  649.  
  650. Yes, I even use it.
  651.  
  652.                 Chris Evelo
  653.  
  654. ==============================================================
  655. Dept. of Occup. &                    Chris Evelo
  656. Environm. Health                     MFAGKCHR@HMARL5 (BITNET)
  657. and Toxicology.
  658. University of Limburg                Tel: 31-43-888635
  659. P.O. Box 616                         Fax: 31-43-436080
  660. 6200 MD Maastricht
  661. The Netherlands
  662. ==============================================================
  663.  
  664. ------------------------------
  665.  
  666. Date: Wed, 29 May 91 11:42:03 +0100
  667. From: Stephen Kendrick <stephenk@cogs.sussex.ac.uk>
  668. To: Info-Atari16@naucse.cse.nau.edu
  669.  
  670.         I am getting a TT, but I already have an HD with an ICD host adapter
  671. and driver software. This allows me to select the boot partition, auto folder
  672. progs, and accessories. I ****!!!NEED!!!**** this feature, but am afraid I will
  673. lose it if I have to boot from the TT's own drive. Any Ideas on how to get
  674. around this would be welcolmed.
  675.         Would this dealer list tell me where I could get a US TT, thereby
  676. saving myself a lot of $$$s? If so, how do I get hold of it?
  677.         On the subject of ST World, it does appear to be going monthly as a
  678. supplement free with Atari ST User, and it's not worth the paper it's written
  679. on any more. Lets hope someone brings out a TT World, devoid of any gaming type
  680. rubbish for us more serious users!!
  681.         The slow boot up of !!ALL!! Atari machines from hard disk is indeed due
  682. to the length of time they try to see a floppy. This allows people to put a disk
  683. in AFTER turning on the machine, if they don't like doing so before. The reason
  684. they always look for a floppy is to allow a floppy boot to override the HD boot.
  685. Why? Well, what if your latest Auto folder or DA master piece on the HD keeps
  686. crashing, and you don't have the option to select them? What could you do about
  687. it if the machine always booted straight from HD first? Atari moves in
  688. mysterious ways, their wonders to perform.
  689.         On the subject of UNIX for the TT, is it going to be available as a
  690. package after purchase? If so, will it allow X11/Xwindows and X/GemOnX to run,
  691. or even include them? Will a poor, lowly, Skint English Student be able to
  692. afford such a package?
  693.         More Questions...Can you upgrade TT Ram with 4Mb(8 bit) SIMMs?? If so,
  694. then why is it $300 cheaper to buy a TT2 and upgrade to 10Mb, than to buy a
  695. TT8. This is why I want a UNIX package AFTER purchase!!!
  696.         Last, but not least, Will the 1280x960 Wyse Monochrome 16" monitor
  697. produce the Hi Res TT display? I can get one for 352 pound sterling.
  698.  
  699.         Thanks for reading all this if you did. If you didn't, so what?
  700.  
  701. +-------------------------------------------------------------------------+
  702. | "I've been drunk for a week! Oooh. My heads hurts..."-Zaphod Beeblebrox |
  703. +-------------------------------------------------------------------------+
  704. | From another guy who lives wher the ST rides High!!! Later!!! Stevie.   |
  705. +-------------------------------------------------------------------------+
  706.  
  707. ------------------------------
  708.  
  709. End of Info-Atari16 Digest
  710. ******************************
  711.